Wheels

- Green colored spoke prep remains pliable for adjustments - Helps keep spoke nipples from loosening

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.

- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O

Lay down Stan's Universal Kit Rim Tape before the tubeless conversion of your non-Stan's rims. It makes your rims air tight and ready for tubeless use by covering the spoke holes.

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

Origin-8's Track Cog Lock Ring with left-handed threading and 1.29 x 24tpi in a chrome finish completes your basic track cog locking needs.

Replacement indicator chain for three speed Sturmey Archer hubs.

Replacement axle sets for use with Origin8 FB-2000 hubs Front Axle: - 3/8 x 26 x 135 x 175 Rear Axle: - 3/8 x 26 x 170 x 210

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.

- End cap adapters for Origin8 RD1120 series 11-speed road hubs

WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.

WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.

SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.

- Extra security against theft - 5mm hex CrMo axle

- Axle adapters for CX/GX/MT/FB-1110 Elite Series front hubs - Available in standard QR, 12mm, 15mm, and 20mm thru-axle options - Material: Aly - Color: Blk

- Axle adapters for RD-1110 Elite Series front road disc hubs - Available in standard QR, 12mm, and 15mm thru-axle options

- Elite Series skewers for road, cyclocross, gravel, and MTB applications - AL6061 alloy lever with CrMo axle - Available for 100mm, 130mm, and 135mm OLD spacing - Spacing / Axle: QR - Wt: 53g

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.

DT-Swiss Center Lock Adaptor. Allows 6-bolt rotors to be used on Center Lock hubs. - Rotor thickness between 1.8mm and 2.2mm - Easy assembly and only 29g - Made in Switzerland by DT Swiss - 230mm version accepts all rotors up to 203mm diameter - 160mm version accepts all rotors up to 160mm diameter

Mavic's Crossride wheels have been a favorite choice among cross country mountain bikers for years. This is due in no small part to their reputation for durability, reliability, and light weight. To achieve this, Mavic laced up the Crossride with 24 stainless-steel bladed spokes, front and rear, and have been constantly improving hub designs to be stronger and lighter in weight. Their QRM bearing standard keeps you rolling smoothly mile after mile with little or no maintenance, and they come with adapters for different axle standards, making your Crossrides versatile for multiple applications. And, these wheels come matched up with Mavic's own Quest tires with durable ARC rubber compound and Guard casing that team up to make for tough, long-lasting, tubeless-ready tires designed to tackle tough terrain worry-free.

The cream of the crop in tubeless valves, Star Valvez are fully CNC'd masterpieces precisely designed and manufactured for a perfect seal and ultra-high airflow during inflation. A set includes 5 adapters in total to match any rim. Laser-etched lock nuts guarantee an airtight seal, and the ultra-sexy super-light Valve Capz give it the finishing touch. Includes: - 2x Fully CNC'd alloy Star Valvez - 2x Alloy Valve Capz - 2x 5-in-1 SupaGrommets

Elite-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black + silver anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: Sapim stainless steel - Spoke butting: 2.0 / 1.8 / 2.0 - Spoke length: 166mm - Spoke pins: hollow 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, alloy - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1850g per set - Weight: 27.5-inch, 1780g per set - E-bike compatible: trail/AM e-bikes up to 350 watts max

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening

If wheel theft could be a problem, then these high-grade locking skewers and nuts will challenge even the most determined thieves. The KnoxNut features a one-of-a-kind nut protected by a super-tough free-floating outer ring, making it impossible to release your wheel with anything other than the special key. KnoxNuts can be installed on existing skewers or combined with the KnoxNut Skewer, a unique and unobtrusive blind-head cromoly skewer. The special forged key is lightweight and easy to carry. Use with regular 6mm allen key to unlock. All keys are marked with a unique serial number and replacement keys are only sold to consumers that have previously registered a key on deltacycle.com. Set Includes: - Front blind-head skewer with KnoxNut - Rear blind-head skewer with KnoxNut