Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp 303 S Tubeless Disc Brake 700c Rear
$727.00
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed
DT Swiss EX 471 29-inch
$150.90
No words needed. Just google "EX 471 Leogang World Cup". Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.
Zipp Tangente Tube Wrench
$7.00
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
Wolf Tooth Components FOX Boost Front Thru Axle
$39.95
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum - Similar to Fox Kabolt axle
Stan's NoTubes Presta Removeable Valve Core
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Whisky Parts Co. Tubeless Rim Tape
$8.00 - $40.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
Whisky Parts Co. Tubeless Conversion Rim Tape Kits
$8.00 - $9.00
Whisky Parts Co. Tubeless Rim Tape.
Stan's NoTubes Neo Front Hub End Caps
$20.00 - $21.00
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
Muc-Off Rim Tape
$11.99 - $14.99
The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.
Boyd Cycling 60MM CARBON CLINCHER FRONT WHEEL
$825.00
SPEED! 95% of racers will call the 60mm clincher their depth of choice! This is a Crit Racing, Triathlon, and Time Trial gem! The carbon 60mm gives you a good combo of crosswind handling and very good aerodynamics. These are designed around a 25mm tire to give the rider the best handling characteristics, keeping the rolling resistance to a minimum. You have the ability to run lower PSI for an improved traction path. Simply put, more contact patch, better overall handling. For your next Criterium, get yourself a 60mm Carbon Clincher and put the hammer down!
Boyd Cycling 60MM CARBON CLINCHER REAR WHEEL
$925.00
SPEED! 95% of racers will call the 60mm clincher their depth of choice! This is a Crit Racing, Triathlon, and Time Trial gem! The carbon 60mm gives you a good combo of crosswind handling and very good aerodynamics. These are designed around a 25mm tire to give the rider the best handling characteristics, keeping the rolling resistance to a minimum. You have the ability to run lower PSI for an improved traction path. Simply put, more contact patch, better overall handling. For your next Criterium, get yourself a 60mm Carbon Clincher and put the hammer down!
Boyd Cycling PINNACLE HOOKLESS REAR WHEEL
$900.00
Gravel rides and equipment are all the rage. With the Pinnacle Hookless. Boyd Cycling proudly is at the front of the Gravel Revolution. A 700c Carbon Wheel, The Pinnacle Hookless is competition ready, designed ideally for gravel and cyclocross tires between 32-42mm in width. This is designed to be a stiff and responsive wheelset. Because the Pinnacle is a disc-specific wheel, we’ve been able to shed a few grams at the rim itself, reducing rotating mass without compromising safety, and the wheel’s unique 2.8mm offset amplifies spoke balance under heavy load.
Boyd Cycling PINNACLE HOOKLESS FRONT WHEEL
$800.00
Gravel rides and equipment are all the rage. With the Pinnacle Hookless. Boyd Cycling proudly is at the front of the Gravel Revolution. A 700c Carbon Wheel, The Pinnacle Hookless is competition ready, designed ideally for gravel and cyclocross tires between 32-42mm in width. This is designed to be a stiff and responsive wheelset. Because the Pinnacle is a disc-specific wheel, we’ve been able to shed a few grams at the rim itself, reducing rotating mass without compromising safety, and the wheel’s unique 2.8mm offset amplifies spoke balance under heavy load.
Boyd Cycling CCC 650B ALLOY GRAVEL REAR WHEEL
$412.50
IMPORTANT - Minimum tire size 30mm. Max 70PSI. This is not the wheelset to use with both 25mm road tires and also gravel tires. The Altamont Lite is perfect for that. The CCC is a gravel optimized wheelset, for when you want to have the best possible configuration for those larger tires. If you're going to ride the gravel roads, we think you should know where they came from. The CCC is a gravel-specific wheelset built to take you far off the beaten path. The new light weight, durable alloy wheelset complements Boyd’s current carbon Pinnacle 700c and Jocassee 650b offering and promises adventure at an affordable $700 price point. The CCC, a name engrained in history as the wooded roads it represents, borrows its moniker from the Civilian Conservation Corps (CCC). The CCC was a voluntary public unemployment program designed to provide jobs for young men and to help families who faced challenges finding jobs during the Great Depression. In the mountains of South Carolina there are remnants of “Old CCC” roads deep in the woods that have become favorite exploration destinations for Boyd Johnson, founder of Boyd Cycling. The 6069 series alloy rim weighs in at 415 grams in a 700c size and 395 grams in the 650b. Built with the highly rated Quest Disc Brake hubs, the complete wheelset nets a scant 1515 grams for 700c set and 1475 grams for the 650b. Spoke count options are 24f/28r and 28f/32r built using Pillar Wing 20 spokes and external brass nipples.
Boyd Cycling JOCASSEE 650B FRONT WHEEL
$825.00
Jocassee is a heritage preserve in the Northwest corner of South Carolina. Containing over 100 miles of gravel roads, Jocassee is a favorite of cyclists looking for a very difficult gravel ride. Founder, Boyd Johnson, started riding in Jocassee on a road bike with 25mm tires in the early 2010s (not highly recommended at all!). Over time gravel started to emerge as a discipline, people migrated to cyclocross bikes, followed by gravel specific bikes. When Boyd Cycling introduced the Jocassee as a 650b gravel wheelset in 2017, it was in a very unique position. 650b for gravel was in its infancy. Most people were running 32 to 35mm tires for gravel rides. Fast forward a few short years later and almost all gravel bikes have the ability to run both 700c and 650b tire sizes. While 700c remains the overwhelming favorite, the ability to have a dual purpose bicycle is a large attraction for people buying a new gravel bike. Throw in our Quest centerlock hubs, Pillar Wing 20 spokes, external nipples and you have the ideal gravel wheel set, built to withstand your hardest rides on your most adventurous weekends! For those of us looking for larger tires (36mm+), the new Jocassee gives a wide rim platform for modern gravel tires. Boasting a 26mm internal width, the updated Jocassee goes to a shallower and lighter 25mm depth. This allows the rim weight to go from 460 grams per rim down to 338 grams in a 650b and 353 grams in a 700c.
Stan's NoTubes Neo Durasync Freehub
$80.00
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed. - 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance - Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components
DT Swiss Competition 14/15/14g (Silver) Spoke
$71.99
- Double butted 2.0/1.8/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 192g @ 32h/265mm - Box of 100 - Nipples sold separately
DT Swiss XMC 1200 SPLINE 30 29-inch Rear
$1,721.90
The XMC 1200 SPLINE 30 is the ultimate all-mountain wheel. A carbon layup specifically tuned for all-mountain use makes the rim tough, yet super-light. And, with a 30mm internal width, it's made for wide rubber. The hubs feature the latest incarnation of our Ratchet System for smooth, rapid engagement and reliability. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed, top-end spokes and perfect DT Swiss build quality, this wheelset is made to ride trails with speed and confidence. - SRAM XD MTB cassette-compatible
DT Swiss XMC 1501 SPLINE ONE 29-inch Rear
$1,193.90
Our all-rounder. A 240 hub combined with a carbon rim results in a durable and versatile package. The low weight of the carbon rim, specially designed for all-mountain use, combined with the latest evolution of the 240 hub with RATCHET EXP freewheel, make the XMC 1501 SPLINE ONE wheels the perfect partner in crime for all kinds of mountain adventures. The 30mm inner width of the tubeless-optimized carbon rim provides excellent support for the wide tubeless tire. Double-butted competition race spokes and the highest quality wheel construction round off our XMC 1501 SPLINE ONE wheels.
DT Swiss Narrow Base Tubeless Valve
$11.70
Tubeless valves for DT Swiss rims for repair or replacement.
DT Swiss 240 Classic EXP MTB Rear Hub
$476.90
Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
DT Swiss 180 EXP Straight Pull MTB Rear Hub
$747.90
The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings. The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.
DT Swiss 240 Straight Pull EXP Road Rear Hub
$465.90
Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
DT Swiss 350 Road Rear Hub
$223.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
Origin8 RD-1110 Elite Road Rear Hub
$209.99 - $249.99
- Elite Series road hubs - Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement - Straight pull and J-bend spoke options - Sealed bearings - Material: AL6061 - Brake Type: Rim - OLD: 130mm Straight Pull Spoke: PCD-L: 32mm PCD-R: 52.5mm LTF-L: 27.7mm LTF-R: 50.8mm CTF-L: 37.45mm CTF-R: 14.35mm J-Bend Spoke: PCD-L: 38.5mm PCD-R: 50.6mm LTF-L: 27.45mm LTF-R: 49.05mm CTF-L: 37.7mm CTF-R: 16.1mm
Origin8 CX/GX-1110 Elite Cross/Gravel Rear Hub
$269.99 - $299.99
- Elite Series convertible cyclocross/gravel hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Use: Rear Hub - Drilling: 28H - Material: AL6061 - Color: Blk - Brake Type: 6B J-Bend Spoke/Quick Release Axle: - OLD: 135mm - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 32.95mm - LTF-R: 48.45mm - CTF-L: 34.7mm - CTF-R: 19.2mm Straight Pull Spoke/Quick Release Axle: - OLD: 135mm - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 36.2mm - LTF-R: 50.1mm - CTF-L: 31.45mm - CTF-R: 17.55mm J-Bend Spoke/12mm Thru-Axle: - OLD: 142mm - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 36.45mm - LTF-R: 51.95mm - CTF-L: 34.7mm - CTF-R: 19.2mm Straight Pull Sple/12mm Thru-Axle: - OLD: 142mm - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 39.7mm - LTF-R: 53.6mm - CTF-L: 31.45mm - CTF-R: 17.55mm
DT Swiss RR 421 DB Asymmetric 700c
$127.90
The reliable rim with an ideal price-to-performance ratio! A state-of-the-art, high-quality aluminum rim, making for the perfect upgrade on any road bike. That is what the new RR 421 rim is all about. The welded rim supports wider tires and still offers a super-lightweight wheel build-up.
DT Swiss R 460 DB 700c
$59.90
The reliable rim with an ideal price-to-performance ratio! The jack-of-all-trades of road rims: light, wide, and with an ideal price-to-performance ratio. The R 460 works perfectly with wide tires and will deliver many unforgettable rides on the road thanks to its reliability.
Syntace X-12 Thru-Axle Axle And Mounting Parts
$35.00
- Syntace x-12 Rear axle standard creates a stiffer and lightweight rear end - Syntace x-12 Parts are only compatible with frames that have Syntace x-12 Dropouts
Origin8 MT-1110 Elite MTB Rear Hub
$269.99 - $299.99
- Elite Series convertible MTB hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 J-Bend/QR: - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 32.95mm - LTF-R: 48.45mm - CTF-L: 34.7mm - CTF-R: 19.2mm J-Bend/142 x 12mm: - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 36.45mm - LTF-R: 51.95mm - CTF-L: 34.7mm - CTF-R: 19.2mm Straight Pull/QR: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 36.2mm - LTF-R: 50.1mm - CTF-L: 31.45mm - CTF-R: 17.55mm Straight Pull/142 x 12mm: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 39.7mm - LTF-R: 53.6mm - CTF-L: 31.45mm - CTF-R: 17.55mm
Page 1 of 19 Next page