650B

What It Is The G27 is the G23's little big brother. Smaller in diameter and lighter in weight, the G27 is designed for the higher-volume tires demanded by many riders on rougher and looser terrain. At 320 grams, our lightest tubeless rim is 27mm wide and designed for tires marked 27.5 or 650B. Armed against pinch flats with the patent-pending Wide Hookless Bead, the G27 is at home off-road and capable on tamer stretches of singletrack. Who It's For Those seeking the challenge of drop-bar riding over more technical terrain that is typically frequented by mountain bikes will benefit from the additional air volume, durability, and anti-flat performance benefits provided by the G27. If your path leads you to rough roads, single tracks, and multi-day bikepacking adventures, the G27 may be for you. Why We Made It There is a place between road and mountain that is open to discovery. Beyond the range of your trail bike or the capabilities of your road bike. Terrain littered with contradicting challenges and demanding requirements are at odds with the bikes and products available today. We built the new G27 to thrive in this new environment because insights gained through building the world's best road and mountain bike rims told us that the perfect combination did not exist in our stable, or in our opinion, anywhere at all. The higher volume and lower pressures would demand MTB toughness and flat resistance, while big days and long miles would require the light weight and efficiency of a road machine. Above all, the combination of rough and rigid would require a wheel with the ride quality to make those long miles enjoyable and multi-day treks possible.

What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology

Introducing the Gravel racing GRC 1400. With a holistic approach of engineering DT re-thought the characteristics of a modern benchmark setting gravel wheel set. Aerodynamic efficiency, ideal support of wide gravel tires leading to comfort and traction off-road as well as remarkable durability are only some of the key features that make this wheel set the perfect companion for your next gravel adventure. - 42mm aero-optimized rim depth for 35mm wide gravel tires - 36T RatchetSystem technology

Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

A carbon structure optimized for impact resistance, a reinforced flange and the ideal resin-carbon fiber ratio make the EXC 1200 Spline the benchmark in the Enduro sector. The rim's inherent strength allows the use of extremely lightweight Aerocomp and Aerolite spokes and generates optimum wheel stiffness. The heart of this wheel is a 180 Straight Pull hub with smooth-running SINC Ceramic bearings and the newest Ratchet EXP freehub system. - Requirement-specific carbon rims are designed for the ultimate enduro riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - SINC ceramic hub bearings are engineered with optimum bearing clearance for minimum friction - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT ProLock Squorx ProHead aluminum spoke nipples

Introducing the Gravel racing GRC 1400. With a holistic approach of engineering DT re-thought the characteristics of a modern benchmark setting gravel wheel set. Aerodynamic efficiency, ideal support of wide gravel tires leading to comfort and traction off-road as well as remarkable durability are only some of the key features that make this wheel set the perfect companion for your next gravel adventure. - 42mm aero-optimized rim depth for 35mm wide gravel tires

EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes. - Designed for Enduro applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub completes this durable and versatile wheel. - Designed for All Mountain applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

DESIGNED FOR HIGH VOLUME TIRES AND ADVENTUROUS RIDING Jocassee is a heritage preserve in the Northwest corner of South Carolina. Containing over 100 miles of gravel roads, Jocassee is a favorite of cyclists looking for a very difficult gravel ride. Founder, Boyd Johnson, started riding in Jocassee on a road bike with 25mm tires in the early 2010s (not highly recommended at all!). Over time gravel started to emerge as a discipline, people migrated to cyclocross bikes, followed by gravel specific bikes. When Boyd Cycling introduced the Jocassee as a 650b gravel wheelset in 2017, it was in a very unique position. 650b for gravel was in its infancy. Most people were running 32 to 35mm tires for gravel rides. Fast forward a few short years later and almost all gravel bikes have the ability to run both 700c and 650b tire sizes. While 700c remains the overwhelming favorite, the ability to have a dual purpose bicycle is a large attraction for people buying a new gravel bike. Throw in our Quest centerlock hubs, Pillar Wing 20 spokes, external nipples and you have the ideal gravel wheel set, built to withstand your hardest rides on your most adventurous weekends! For those of us looking for larger tires (36mm+), the new Jocassee gives a wide rim platform for modern gravel tires. Boasting a 26mm internal width, the updated Jocassee goes to a shallower and lighter 25mm depth. This allows the rim weight to go from 460 grams per rim down to 338 grams in a 650b and 353 grams in a 700c.

With a modern internal width of 26mm, this hookless rim mates perfectly with fast rolling cross-country tires ranging from 2.1” to 2.4” and gravel tires from 32mm and up. At the center of the wheel are the Quest Disc MTB hubs (120 grams for the front and 245 grams for the rear) with their super quick five-degree engagement, tool free service and centerlock spline for disc brake rotors. Pillar Wing 20 J-Bend spokes and alloy nipples are laced double-cross with 24 spoke front and 28 spoke rear. The ultra-light, yet durable, 370-gram rim (370 gram/29er; 340 gram/27.5) measures 26mm internal, featuring a 2.8mm offset rim bed for better tension balance and a more responsive wheel build. These specs total up to a 1380-gram (1380 gram/29er, 1330 gram/27.5) wheelset that has a modern day wider rim design and can handle the rigors of cross country mountain bike riding. For more extreme terrain, the 30mm Ridgeline Enduro wheels are a perfect pick.

Zipp's 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. Already this wheelset and its MOTO Technology are proven with multiple victories in the Enduro World Series with our pioneering partnership with Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers-uninhibited by legacy technology-took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. Zipp's Speed Line graphics give you the choice of five colors for a wheel with high-performance aesthetics. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

Jocassee is a heritage preserve in the Northwest corner of South Carolina. Containing over 100 miles of gravel roads, Jocassee is a favorite of cyclists looking for a very difficult gravel ride. Founder, Boyd Johnson, started riding in Jocassee on a road bike with 25mm tires in the early 2010s (not highly recommended at all!). Over time gravel started to emerge as a discipline, people migrated to cyclocross bikes, followed by gravel specific bikes. When Boyd Cycling introduced the Jocassee as a 650b gravel wheelset in 2017, it was in a very unique position. 650b for gravel was in its infancy. Most people were running 32 to 35mm tires for gravel rides. Fast forward a few short years later and almost all gravel bikes have the ability to run both 700c and 650b tire sizes. While 700c remains the overwhelming favorite, the ability to have a dual purpose bicycle is a large attraction for people buying a new gravel bike. Throw in our Quest centerlock hubs, Pillar Wing 20 spokes, external nipples and you have the ideal gravel wheel set, built to withstand your hardest rides on your most adventurous weekends! For those of us looking for larger tires (36mm+), the new Jocassee gives a wide rim platform for modern gravel tires. Boasting a 26mm internal width, the updated Jocassee goes to a shallower and lighter 25mm depth. This allows the rim weight to go from 460 grams per rim down to 338 grams in a 650b and 353 grams in a 700c.

Ridgeline - There is no half send! Updated with our Tripel hub, Ridgeline is your go-fast wheel for the woods! We aren’t kidding! The lightweight 27.5 or 29, combined with our quick 3.5 degree engagement, super low drag, Tripel hub is where it’s at for your thirst for speed and catching air! A super strong hookless rim with the potential to put a smile on any old school or new school riders face. We have tested this wheel countless hours, miles, jumps, and beers to meet our standards of fun. If you don’t know how we get down, just know, we go hard! This wheel withstands all of our antics. Tubeless ready out of the box, this piece of carbon is your 1st upgrade you should consider for your mountain bike!

With a modern internal width of 26mm, this hookless rim mates perfectly with fast rolling cross-country tires ranging from 2.1” to 2.4” and gravel tires from 32mm and up. At the center of the wheel are the Quest Disc MTB hubs (120 grams for the front and 245 grams for the rear) with their super quick five-degree engagement, tool free service and centerlock spline for disc brake rotors. Pillar Wing 20 J-Bend spokes and alloy nipples are laced double-cross with 24 spoke front and 28 spoke rear. The ultra-light, yet durable, 370-gram rim (370 gram/29er; 340 gram/27.5) measures 26mm internal, featuring a 2.8mm offset rim bed for better tension balance and a more responsive wheel build. These specs total up to a 1380-gram (1380 gram/29er, 1330 gram/27.5) wheelset that has a modern day wider rim design and can handle the rigors of cross country mountain bike riding. For more extreme terrain, the 30mm Ridgeline Enduro wheels are a perfect pick.

Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos

Elite-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black + silver anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: Sapim stainless steel - Spoke butting: 2.0 / 1.8 / 2.0 - Spoke length: 166mm - Spoke pins: hollow 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, alloy - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1850g per set - Weight: 27.5-inch, 1780g per set - E-bike compatible: trail/AM e-bikes up to 350 watts max

The Arch MK4 is the wheelset a lot of us here at Stan's choose to ride. All-mountain, Downcountry, Trailduro—whatever they're calling it this week, when you like pushing your limits on climbs, descents, and every kind of trail, this is your wheelset. The Arch MK4's 28mm internal width and patented lightweight, low-profile design is not afraid to climb, while being an absolute monster on the descents. With a welded seam, reinforced spoke bed, and durable 6069 aluminum construction, the Arch MK4 rims give you the confidence to ride everything. When it comes to a consistent and reliable airtight tubeless seal, nothing beats Stan's patented Bead Socket Technology. The Arch MK4 rims feature an asymmetric design with offset spoke holes to improve spoke angle and create a stronger all-around wheel. Unlike most asymmetric rims that suffer from difficult inflation and poor tubeless performance, Stan's BST-Asymmetric design delivers all the advantages of a stronger wheel, with no compromises in tubeless performance. Nobody likes downtime, so the Arch MK4 wheelset is built with traditional J-bend spokes based on their proven strength, ride quality, and easy serviceability. Stan's has always made it easy to find replacement spokes should you ever damage your wheel, and now we've made it even easier. MK4 front and rear wheels of the same diameter all use the exact same very common spoke length, both sides, front and rear. Serviceability doesn't get any easier than that. From the first click of the incredible M-pulse hubs, it's clear that confidence is the philosophy behind every part of this wheelset. Designed and CNC machined by Project321 in Bend, Oregon, M-pulse freehubs feature 6 pawls with Neodymium magnets that lock into place with greater force than conventional pawl springs, but offer virtually no resistance when coasting. Multiple teeth on each pawl offer better load distribution for years of trouble-free riding, and the angle of the pawls was engineered to transfer stress away from the rotating bearings, decreasing stress and wear on the entire freehub. That durability extends to the 17mm axles machined of 7075 aluminum and the full complement of Enduro brand bearings, including a double-row freehub bearing. M-pulse internals are also fully shielded inside the hub, because the only thing better than a good bearing seal is a good bearing seal most dirt can't even reach. As durable as they are, these hubs are also built for speed. M-pulse hubs engage with only 1.66°of rotation, putting down power nearly instantaneously, but how smooth these hubs roll is what really stands out. Adjustable preload allows you to fine tune M-pulse hubs for reduced friction, and less drag means more speed on the ground.The result is a bombproof hub with quick, consistent engagement and less resistance for more speed. Available with Shimano Micro Spline, HG, or SRAM XDR freehub, and 6-bolt or Centerlock brake style, with options to fit all popular axle configurations. Tubeless ready with rim tape installed. The Arch MK4 is our most versatile wheelset, and the best aluminum wheelset available for riders who want to push limits on every trail. Up, down, and wherever the ride takes you, the Arch MK4 wheelset has it under control. - Arch MK4 wheels include pre-installed tape for tubeless use and presta valves. - Versatile 28mm internal rim width optimized for 2.2-2.5” tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed - BST-Asymmetric design combines Stan’s legendary easy tubeless inflation with a stronger, more balanced wheel build - M-pulse ultra-low drag magnetic pawl adjustable hubs with 1.66° engagement - Enduro bearings with double-row freehub bearing - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - Connection program includes 5-year hub warranty, 3-year rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

The aluminum Enduro wheelset made for the roughest Enduro tracks around the world. We have taken all our aluminum wheel know-how and put it into this high-performing package. EX 1700 SPLINE wheels are based on our famous 36T RATCHET hubs combined with a super-strong and welded 30mm-wide aluminum rim. The rim profile is designed to withstand the hardest use of Enduro racing while still keeping the weight low for long and demanding uphills. Laced to double-butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating.

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance. Built on reliable 350 hubs with 36-tooth ratchet engagement. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

Turn your XC bike into an XC rocket with Giant's light, stiff P-XCR0 27.5-inch Composite wheels. The go-fast magic comes from the wheel's 25mm-wide carbon, tubeless-ready rim — it's more than ready to slay your favorite trails. Giant supplies the aluminum hub shells, and DT Swiss provides their renowned star rachet internals, as well as their Aerolite bladed stainless steel spokes, and aluminum nipples for unparalleled ride quality, strength, and speed.

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

Increase the agility of lightweight eMTBs using this specific aluminum wheelset. Aligned to the purpose of lightweight eMTBs, the HX 1700 SPLINE LS aim for the right balance between lightness and resistance for more dynamic handling. The 350 hubs have been redesigned for eMTB to offer more resistance to the acceleration and braking forces. In addition, the spokes have been modified to increase their strength without drastically increasing the weight. These wheels are ready to be ridden on the fastest lines in technical sections and to carve into fast and tight turns. - Built to provide enhanced riding agility for light eMTBs - Agility-focused aluminum rims are light, yet resistant; helping to enable agile riding - New Hybrid-specific spokes for an advanced riding experience, combining resistance and lightweight - Built with the 350 Hybrid LS hub for enhanced reliability and contained weight

EX 1700 SPLINE wheels feature a super strong and welded 30 mm wide aluminum rim with a profile design made to withstand the hardest use of Enduro racing, while still keeping the weight low for long and demanding uphills. Laced to double butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Enduro applications

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance, built on reliable and smooth rolling 350 hubs. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

IMPORTANT - Minimum tire size 30mm. Max 70PSI. This is not the wheelset to use with both 25mm road tires and also gravel tires. The Altamont Lite is perfect for that. The CCC is a gravel optimized wheelset, for when you want to have the best possible configuration for those larger tires. If you're going to ride the gravel roads, we think you should know where they came from. The CCC is a gravel-specific wheelset built to take you far off the beaten path. The new light weight, durable alloy wheelset complements Boyd’s current carbon Pinnacle 700c and Jocassee 650b offering and promises adventure at an affordable $700 price point. The CCC, a name engrained in history as the wooded roads it represents, borrows its moniker from the Civilian Conservation Corps (CCC). The CCC was a voluntary public unemployment program designed to provide jobs for young men and to help families who faced challenges finding jobs during the Great Depression. In the mountains of South Carolina there are remnants of “Old CCC” roads deep in the woods that have become favorite exploration destinations for Boyd Johnson, founder of Boyd Cycling. The 6069 series alloy rim weighs in at 415 grams in a 700c size and 395 grams in the 650b. Built with the highly rated Quest Disc Brake hubs, the complete wheelset nets a scant 1515 grams for 700c set and 1475 grams for the 650b. Spoke count options are 24f/28r and 28f/32r built using Pillar Wing 20 spokes and external brass nipples.