Cables

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables. - Inside diameter: 4mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

Hydraulic hose with banjo fitting for TRP brakes.

Hydraulic hose with banjo fitting for TRP brakes.

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Rubber - Color: Black

• 50 feet (15.2 meters) length • 5mm diameter brake cable housing

- Steel cable noodle with alloy end caps - Includes plastic liner

- Replacement link wire for cantilever brakes

- MTB or Road - 1.5 x 1855mm - Galvanized

Shifting cables for Road/Mountain bikes.

- MTB or Road - Stainless steel - 1.5mm diameter - 2000mm length

- Complete cable kits for internal three-speed hubs

- Galvanized steel inner wire - Standard 5mm brake housing - Front or Rear

- Multi-strand construction - Length: 25 feet - Size: 4mm

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

- Wet or muddy condition cable sealing solution - 4/6mm

Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1

- 1.2 mm x 2100 mm (1 pc.) - 1.2 mm x 1800 mm (1 pc.) - OPTISLICK - Stainless steel - Outer cap with short tongue for ST (2 pcs.) - SIS-SP40 outer caps (3 pcs.) - SIS-SP40 sealed outer caps (1 pc.) - Inner end caps (2 pcs.) - OT-SP41 1700 mm - OT-RS900 (1 pc.)

- Disc brake hose for all hydraulic Shimano disc brakes with straight connection type. Length 2000mm, outer diameter approx. 5mm. - Compatible brake levers: BL-T615, ST-M4050, BL-M506, BL-M505, BL-M445, BL-M396, BL-M395, BL-M355 - Compatible brake caliper: BR-T615, BR-M4050, BR-M447, BR-M446, BR-M395, BR-M355 - Also compatible ST-RS785 and ST-RS685 road hydraulic levers with BR-RS785 or BR-RS805 calipers - Straight connection at lever and caliper

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

Shimano, SP41, 4mm Shifter housing, 50m

Shimano, SLR brake housing, 40m, Black

Stainless steel cables are extruded to provide a smooth low-friction surface.

- Front or rear brake - MTB specific - 1.5mm stainless cable

Stainless steel cables are extruded to provide a smooth low-friction surface. - Length: 2000mm

Stainless steel cables are extruded to provide a smooth, low-friction surface.